MWI-05-001 – Rev. B
11
5.
Maintenance and Repair
No regularly scheduled maintenance is required for the unit.
Flight Light warranties the light output of the L810LED to meet and exceed FAA requirements
for a five-year period.
Life time expectancy is 70,000+ hours.
The LED board is sealed inside the top head assembly. In case of failure the entire engine must
be replaced.
1.
Ensure power is off before servicing the lighting fixture
2.
Open the Clamp Ring that is holding the top assembly and the bottom casting together
3.
Remove the existing engine
4.
Run the wires from the new engine through the bottom casting and position the unit over
the gasket located in the bottom casting
5.
Secure the unit by closing the clamp ring
The functionality of the Flight Light L810LED Obstruction lights is not affected by their use in
conjunction with another LED lights or another manufacture’s LED obstruction lights.
The performance and life time expectancy of the Flight Light L810LED obstruction light(s) may
be affected if controlled by another manufacture’s controller. In consequence, if the lights are
used with another’s manufacture controller, the warranty will be voided. We don’t recommend
using our L810LED obstruction lights with another controller, but our NV1200 Series.
Summary of Contents for L810LED
Page 2: ...MWI 05 001 Rev B ...
