[12]
3.2
Operating Set-Up — Windows XP
This section reviews how to set up the
Flight Sound X
adapter for use
with a PC equipped with the Microsoft XP (including Service Pack 2
updates) operating system. When the installation is complete, the
Flight
Sound X
software is ready to use.
3.2.1
Basic Setup
Follow these steps to set up the
Flight Sound X
adapter for use with
Windows XP.
Step 1: Connect one end of the USB cable (supplied) to the
Flight Sound
X
adapter
and the other end to an available USB port (or hub) on the PC.
After the
Flight Sound X
adapter
is connected to the PC, the standard
Windows XP driver installs automatically to the PC. A custom driver for
the
Flight Sound X
adapter
is unnecessary.
Step 2: Open the Control Panel from the Start menu ( Start → Control
Panel). Open the Sound and Audio Devices group from the Control
Panel.
Step 3: Select the Audio tab and confirm the “Flight Sound X”
appearance as the default playback and recording device, as shown in
Figure 3-5.
This process confirms the proper recognition of the
Flight Sound X
by
Windows XP.