[6]
3.
Set-up Guide
3.1
Operating Set-Up — Windows 10/8/7/Vista
This section reviews how to set up the
Flight Sound X
adapter for use
with a PC equipped with the Microsoft Windows 10/8/7 or Vista
operating system. When the installation is complete, the
Flight Sound X
software is ready to use.
3.1.1
Basic Setup
Follow these steps to set up the
Flight Sound X
adapter
for use with
Windows 10/8/7/Vista.
Step 1: Connect one end of the USB cable (supplied) to the
Flight Sound
X
adapter
and the other end to an available USB port (or hub) on the PC.
After the
Flight Sound X
adapter
is connected to the PC, the standard
Windows 7/Vista driver installs automatically to the PC. A custom
driver for the
Flight Sound X
adapter
is unnecessary.
Step 2: Open the Control Panel from the Start menu (Start → Control
Panel). Open the Sound Group from the Control Panel.
Step 3: Select the playback tab and confirm the “Flight Sound X”
appearance as the default playback device, as shown in Figure 3-1.
Step 4: Select the recording tab and confirm the “Flight Sound X”
appearance as the default recording device, as shown in Figure 3-2.