| Flightcell
®
DZM Operating Manual | Firmware v2.00
Page 25 of 88 |
STEP 2 - Answering the call:
Incoming calls are answered from the 'Main Screen'.
The phone status on the 'Main Screen' displays
Incoming Call
.
From the 'Main Screen', press the
ENTER key to answer the
incoming call. The phone status displays
On Call
.
In the unlikely event that calls are received on both the satellite
and cell modems simultaneously, both will be answered when the
ENTER key is pressed.
STEP 3 - Terminating the call:
Press the
CANCEL key to terminate a call at any time. The
phone status returns to
Ready
.
Using touch-tone dialing (DTMF) during a call
Dual-tone multi-frequency (DTMF) signaling, commonly known as touch-tone dialing, uses key tones to signal to
automated operator services and some PABX systems. Common examples of where DTMF signaling is used are
when selecting choices from telephone menus of call centres, using phone banking, etc.
The DZM can send DTMF tones during a call when required.
STEP 1 - Selecting DTMF mode:
During a call, when DTMF is available,
Press ENTER for DTMF
flashes on the LCD display.
Press the
ENTER key to select DTMF mode.
When in DTMF mode, all keys (except the
ENTER key) represent tones.
Press the
CANCEL key for the * character if required. Press and hold the
CANCEL key for the
# character if required.
STEP 2 - Returning to normal key mode:
Press the
ENTER key when in DTMF mode to return to normal key mode.
