MAN_DZ4_002 Rev 22.0 Flightcell
©
DZMx & DZMx Plus Operator Manual
Page 17 of 43
Effective Date: 28 Jun 2021
3.
Press the A or B key to select the modem and initiate the call using the call key.
4.
Press END to terminate the call.
Calling using Speed Dial
The speed dial keys are automatically linked to the first three numbers in the phonebook.
1.
Press the speed dial key for the required number. SPD1, SPD2 or SPD3. The contact name
and number will be displayed.
2.
Press the A or B key to select the modem and initiate the call.
3.
Press END to terminate the call.
Redialling the last number called
1.
Select the modem to be used for the call by pressing A or B to display the Enter Phone
Number screen.
2.
Instead of entering a number, press CALL; the contact name (if in the phone book) and the
number of the last number dialled will be displayed.
3.
Press CALL or ENTER to initiate the call.
4.
Press END to terminate the call.
Calling the Sender of a Text Message
1.
Open the message so that it displays on the screen.
2.
Press A or B to select the modem and initiate the call.
Answering a Call
When an incoming call is detected an
“
Incoming Call
”
pop-up will flash on the main screen.
1.
Press CALL to answer the call.
2.
Press END to reject or end the call.
If caller ID is supported by the network, the caller’s phone number, or name, if in the phone book,
will be displayed.
Extra Call Features
Call Forwarding
Incoming cellular voice calls can be redirected to a telephone number when the aircraft is
powered down or when there is no cellular network connection.
To configure and enable call forwarding:
1.
Select MENU > Call Forwarding > Enter Number and manually enter the telephone number,
press ENTER. Select END to return to the main screen.
2.
Information will be sent to the cellular service provider and
“
Updating Call Forward
Information Over Cell Network
”
will be displayed temporarily, followed by
“
Call Forward
Number Updated
”
.
3.
Alternatively, select MENU > Call Forwarding > Select from Phone Book and select an
existing contact number. Select END to return to the main screen.
4.
Alternatively, select MENU > Call Forward Enable > Yes. Select END to return to the main
screen.
Summary of Contents for DZMx
Page 42: ......