MAN_DZ4_002 Rev 22.0 Flightcell
©
DZMx & DZMx Plus Operator Manual
Page 24 of 43
Effective Date: 28 Jun 2021
Section 9:
Data
The DZMx cellular and satellite modems provide data connections to the internet using the DZMx
Ethernet port as a router. When a PC or laptop is plugged into the units Ethernet port, the DZMx
will allocate an IP address in the range 192.168.4.xxx.
Cellular Data
When the DZMx is successfully connected to the cellular data service, the DZMx status line for
the modem will display "Online".
Satellite Data
To start or end the satellite data connection, press and hold the corresponding modem key, A or
B. The modem will display "Going Online". When the data has successfully connected, the
modem will display "Data Online".
Multiple Data Connections
Automatic data routing is not supported. Turning on both data connections simultaneously is not
recommended. If the Cellular and Satellite data are both turned on, the connection used will be
the last one turned on, which may not be the fastest or most economical connection.
Note
:
To activate cellular or Iridium data the DZMx must be configured using the
DZMx Connect app. Refer to the Installation Manual for further information.
Summary of Contents for DZMx
Page 42: ......