MAN_DZ4_002 Rev 22.0 Flightcell
©
DZMx & DZMx Plus Operator Manual
Page 31 of 43
Effective Date: 28 Jun 2021
3.
A pairing notification message with a confirmation code will appear on both the DZMx and
the mobile device. Ensure they are the same number.
4.
Press ENTER on the DZMx keypad, then select Pair on the mobile device.
Apple devices select both phone audio and media audio automatically. Android devices select the
settings icon on the paired device and select call audio, media audio, or both.
After pairing, the mobile device can be disconnected and re-
connected using the mobile device’s
Bluetooth settings.
When a device is paired auto-
connect functionality is available, allowing a user’s mobile device
to
automatically connect to the DZMx. The auto-connect functionality may vary according to mobile
devices and the level of support provided by their operating systems. Some devices may need to
be connected manually.
Auto-connect can be enabled in one of two ways:
»
Using the keypad select Menu > Hardware Config > Wireless and Networks > Bluetooth Auto-
connect.
»
Using the DZMx Connect app navigate to Connectivity > Bluetooth > toggle On, Discoverable
or Auto-connect.
When enabled the DZMx will scan periodically for previously paired devices to connect with. If
that device is not present, it will try to connect with the next most recently connected device.
Media Streaming
The DZMx and DZMx Plus support a Bluetooth audio streaming protocol called A2DP. If a
Bluetooth device is connected and pairing has been successful, a musical icon will appear in
the top left corner of its display.
When the user starts audio playing on the connected mobile device it will be audible through the
ICS or Headset.
Hands free Calling
The DZMx supports a Bluetooth audio Hands Free Profile (HFP). If a Bluetooth device is
connected in this mode and pairing has been successful, the DZMx will display a mobile phone
icon in the top left corner of its display. If a user receives or initiates a call on the paired mobile
device, the audio will be routed to/from the ICS/Headset.
Bluetooth Phonebook
The DZMx offers a Bluetooth phonebook transfer function that copies contacts from a smart
device to the DZMx phonebook. This is a separate phonebook to the one where normal DZMx
contacts are stored. It is a temporary function, and the contacts are erased in the DZMx when the
unit powers off. Refer to the Installer Manual for details on how to configure this for iPhone and
Android.
Summary of Contents for DZMx
Page 42: ......
