WARNING
ENSURE THAT ALL PERSONNEL ARE
CLEAR FROM COCKPIT CONTROLS
AND FROM MOTION BASE AREA BE-
FORE
PRESSING
THE
CONTROL
LOADING OR MOTION SYSTEM PUSH
BUTTONS.
10.) On the Hydraulic Control Panel at the Instructor Station, press the CONTROL
LOADING push button.
11.) Verify that the Control Loading push button flashes amber for a few seconds, then
illuminates amber. The instruments should reset and the control sticks should move to the
flight-neutral position.
12.) The flight crew can now enter the cockpit. Close and latch the simulator door.
13.) Ensure that all personnel are seated with seat belts fastened.
14.) On the Hydraulic Control Panel at the instructor station, press the MOTION SYSTEM
push button.
15.) Verify that the Motion System push button flashes amber while the motion base moves
to the flight-neutral position, then illuminates amber. The Sonalert
warning will sound
while the access ramp rises to its vertical position.
The simulator is now ready to begin a training session.
TM-3-B 737-IOS1-007
BRINGING SIMULATION UP
FSI-SSD
3-3
Operation (NT IOS)
B 737
JAN 2001