FT-112(D) Panel Weighing Indicator, Technical Manual, Rev.1.0.0, May 2019
Page
77
of
170
Data Entry to the linked memories together with ID memory
You may enter data into the related memories together with data entry to the items from ID memories for easy
use as;
For example, if ID1 is interrelated with SET and PT memories by parameter 373, the data entry can be done to
the item 111 as described below.
1. Press
key for more than 2 seconds in weighing operation. The [ MEMORY ] prompt will be
displayed.
2. Press
key to enter ID1 memory. [ID1: 001 ] message appears. The number on the right is
the memory code.
3. Enter the code numerically (for example 111) or use
or
keys to navigate in the ID memory.
4. The Identification data in the memory appears on the display after pressing
key. Enter the new
alphanumeric ID data up to 32 digits and press
key.
5. The limit values of the item appears [ SET 111-SP1 ] [ 0.0 kg ] on the display. Enter the limit
values in sequence.
6. The specific tare of item appears on the display [ PT 111: ] [ 0.0 kg ]. Enter the new PT value
and press
key.
7. The following memory code appears [ ID1 112 : ].
8. Press
key to go on entry or press
key to exit.
Select data from linked memories
1. Press the identification key
. The ID1 data appears
2. Press
key to go into the memory.
3. After the last used code appeared [ ID1 :123 ], enter the ID memory code of the item.
4. Press
key to select the identification data and link data to ID1, which are displayed in sequence.
The instrument returns to the operation mode after loading the selected item.
5. Or press
key to return without any select.
