FT-112(D) Panel Weighing Indicator, Technical Manual, Rev.1.0.0, May 2019
Page
86
of
170
10.3.1 Product Entries at Filling
Product entries at filling are;
Entry type
Target
Coarse
Feeding
Fine
feeding
Tare
minimum
Tare
maximum
Unloaded
scale limit
Value
TARGET
COARSE
FINE
TAREMIN
TAREMAX EMPTY
Deviation
TARGET
COARSE
FINE
TAREMIN
TAREMAX EMPTY
Percent % TARGET
COARSE
FINE
TAREMIN
TAREMAX EMPTY
TARGET:
The nominal weight to be filled,
COARSE:
Coarse cut off at entry type value or
Coarse = Target - Course cut off at entry types deviation and ratio,
FINE:
Fine cut off at entry type value or
Fine = Target - Fine cut off at entry types deviation and ratio,
TAREMIN:
The minimum of Tare weight,
TAREMAX:
The maximum of Tare weight,
EMPTY:
The weight range which the scale is accepted unloaded.
Example: If you fill 1000 g into the container at deviation entry type and container weight is between 150g and
190 g, the coarse feeding is up to 900 g and fine feeding is up to 980 g;
Following should be entered:
Target = 1000g, Coarse= 100g, Fine = 20g, Taremin= 150g and Taremax = 190g. Empty value might be 100g.
If the target will increase to 1100g, the change of coarse and fine values at entry types deviation and ratio is
not required.
The nominal and limit value entry
1. Press the
key.
2. The current target value appears on the display as [ TARGET: 1000g ]. Enter the new value with
numerical keys. Press the
key to save it or press
key to return operation without saving.
3. The current preact value is shown [ COARSE : 100g ]. Enter new value with numerical keys.
Press the
key to save it or press
key to return operation without saving.
4. The current dribble value appears [ FINE : 20g ]. Enter new value with numerical keys. Press the
key to save it or press
key to return operation without saving.
5. The minimum tare weight is displayed [ TAREMIN : 150g ]. Enter new value with numerical keys.
Press the
key to save it or press
key to return operation without saving.
6. The maximum tare weight is shown as [ TAREMAX : 190g ]. Enter new value with numerical keys.
Press the
key to save it or press
key to return operation without saving.
7. The [ EMPTY : 100g ] prompt indicates the current empty range of the platform. Enter new value with
numerical keys.
8. Press the
key to return to the operation after saving the entry or press
key to go back
operation without saving the new empty range.
Product record into the SET memory
1. Press
key for more than 2 seconds. [ MEMORY ] prompt appears.
2. Press
key. The last used Set memory code appears [ SET :001 ].
3. Enter the new memory code by pressing the numerical keys and press
key.
4. The previous target value will appear on the display as [ SET 001: TARGET ], [ 5.00 kg ]. Enter the
new value with numerical keys and press the
key.
5. The [ COARSE : 1,80 ] prompt appears on the display. Enter new value with numerical keys. Press
the
key to save it or press
key to return operation without saving.
6. The [ FINE : 0,20 ] prompt appears on the display. Enter new value with numerical keys. Press the
key to save it or press
key to return operation without saving.
7. The [ TAREMIN : 0,60 ] prompt appears on the display. Enter new value with numerical keys. Press
the
key to save it or press
key to return operation without saving.
