FT-112(D) Panel Weighing Indicator, Technical Manual, Rev.1.0.0, May 2019
Page
97
of
170
S IND Free setpoint of indicated weight
The digital output is activated with comparing the set point value and indicated weight value as shown
below.
Example:
if SP1
SP1
LOW
SP1
HIGH
SP2
SP2
LOW
SP2
HIGH
= 100 kg or
= 100 kg
= 150 kg
= -200kg or
= -200kg
= -225kg
BAS-HI
Basic, active high
Output is high if indicated weight is
heavier than setpoint.
(Default)
BAS-LO
Basic, active low
Output is low if indicated weight is
heavier than setpoint.
THR-HI
Threshold, active high
Output goes to high if indicated weight is
heavier than setpoint high. Returns the
low if the weight is less than setpoint
low.
