FT-112(D) Panel Weighing Indicator, Technical Manual, Rev.1.0.0, May 2019
Page
15
of
170
Passwords
RELATED PARAMETERS: Sub-block 26- .
3.4.1 Keylock
FT-112(D) Panel has the capability to lock the keys to avoid unauthorized interfere. The key(s) which would be
locked are programmed in the setup at sub-block 34- . Key lock
password
default is
11
.
Lock the keys:
1. Press
key for more than 2 seconds. [LOCK PASSWORD: ] prompt appears on the display.
2. Enter the key lock password. Refer to parameter 261.
3. Press
key. symbol appears on the display.
Unlock the keys:
1. Press
key for more than 2 seconds. [LOCK PASSWORD: ] prompt appears on the display.
2. Enter the key lock password.
3. Press
key. symbol disappears on the display.
3.4.2 Passwords
RELATED PARAMETERS: Sub-block 26- .
Keylock password
This password can be used to lock the keys and to erase the grand total by authorized person.
The default password
is
11
. Refer to sub-block 34- and the parameter 325.
User password
This password is used to setup the interface, usage configuration and application related parameters for
your application. The default password is
1111
.
Service password
This password is used by trained technical persons to access parameters of the instrument and
calibration only. The default password is
1111
.
