■
Zooming in
■
Zooming out
■
Focus far
■
Focus near
■
Frozen
■
Zoom box
■
Adjusting
7.2.2.9
Declutter function
At times the operator may want to remove all the symbology from the image. The
system is capable of two levels of symbology display:
Declutter none
(all symbology
is displayed normally as defined from the
Setup
→
Symbology
menu), and the DE-
CLUTTER mode where all of the symbology is removed.
NOTE: The DECLUTTER mode is only active until the operator presses the ENTER key.
14
Publ. No. 1 557 544 Rev. a121 – ENGLISH (EN) – October 6, 2005
7.2 – System display & symbols
