14.12
Setting & switching reference images
General
A reference image is an image that you want to compare with another image. The
two images can be images of the same object, but taken at different times and dates.
By comparing the two images, you can see if the object in question has reached a
critical condition.
Setting reference
image: Method 1
Follow this procedure to set an image as a reference image:
1
To go to the mode selector, push the
button to the right of the joystick.
In the Mode selector, select
Archive
and push the joystick.
2
To go to the image you want to set as reference image, move the joystick
left/right.
3
To display a menu, push the joystick.
4
On the menu, select
Set as reference image
to set the image as a reference
image.
5
Setting reference
image: Method 2
Follow this procedure to set an image as a reference image:
1
To go to the mode selector, push the
button to the right of the joystick.
In the Mode selector, select
Archive
and push the joystick.
2
To see an overview of all images, push the Focus button.
3
Push the joystick left/right or up/down to select the image you want to set
as a reference image.
4
To display a menu, push the joystick.
5
On the menu, select
Set as reference image
and push the joystick.
6
14
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011
83
14 – Working with views and images
Summary of Contents for B6 series
