11.1
Connecting devices to the rear connectors
Figure
10728503;a1
Explanation
This table gives an explanation to the figure above:
To connect an external USB device to the camera, use a USB-A cable and
this connector. You can also plug in a USB memory stick in this connector,
or a USB-Bluetooth micro adapter. For WLAN connectivity to a remote
control (P/N T197230), use a USB-WLAN micro adapter.
1
To connect a computer to the camera to move images and files to and from
the camera, use a USB mini-B cable and this connector. This connector is
also used when pairing the camera to the remote control (P/N T197230).
2
To connect a computer for recording infrared sequences at high speed,
use a FireWire cable and this connector. You also move images and files
to and from the camera using a FireWire cable.
3
To connect a video monitor to the camera, use a CVBS cable (a composite
video cable) and this connector. When the lid to the connectors is closed,
you can get access to the connector by opening a rubber lid.
4
Related topics
Section 25 – Finding the IP address for a camera connected using a FireWire cable
on page 159
11
36
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011
11 – Connecting external devices
Summary of Contents for B6 series
