427-9030-01-12 Version 140
March 2018
23
2
Basic Operation and Configuration
Surveillance > Scan List
Surveillance > Auto Scan
Relative Auto Scan (Surveillance mode) will scan the scene starting with the current position of the
camera. Absolute Auto Scan will scan the scene starting with the zero azimuth position of the camera.
can be started and the parameters set in the web page, note also that Absolute Auto Scan can also be
started as an option in the Startup mode when the camera boots. Refer to
Sensor > Devices > Pan &
Tilt, pg. 33
.
Click Set
select Preset ID
position camera,
To setup Presets:
then select Start
select width and speed,
To start Auto Scan:
select limits,
select speed,
Set Autoscan parameters:
click Save
