427-9030-01-12 Version 140
March 2018
25
2
Basic Operation and Configuration
Server > Services > Date and Time
The date, time, and time zone can be obtained from an NTP server, or can be entered manually. If the
NTP mode is selected, the NTP server information can be entered. The NTP server address can be
entered as a static address or can be obtained via DHCP.
Note
Set the date and time parameters, then select the Save button at the bottom. After saving the settings,
reboot the system. Refer to
Server > Server Status, pg. 26
.
If the Custom mode is selected, a pop-up window allows the information to be entered manually.
The server must be stopped before date and time settings can be changed.
Select
Custom
Set Date
