6. Rotate the inner ring of the lens 30° clockwise. The lens makes a click when it locks
in place.
7. Make sure that the two index marks are aligned, indicating that the lens is locked in
place.
7.18
Calibrating the lens–camera combination
Applicability
: Camera models with an exchangeable lens.
7.18.1
Introduction
Before a new lens can be used with the camera, the lens–camera combination must be
calibrated
.
This is a process that previously had to be performed by a FLIR service department, but
for the FLIR Exx-EST series the calibration can be performed by the user. This feature is
called AutoCal. The AutoCal procedure requires a calibration target, which is included in
the lens package.
#T810583; r. AA/75420/75423; en-US
33
