Setup — Screening station (Auto and Button mode)
7. Place persons of different heights at the marking for the screening position (not clos-
er or further away from the camera).
Look at the image on the display and check that it is possible for the person to get the
eyes inside the box.
• Tall persons may have to bend their knees.
• Short persons may need e.g. a high chair to sit on.
10.3.10
Place the queueing system and supporting materials
Queueing system.
1. Place the barriers that will guide the persons through the screening station.
2. Place the arrow stickers.
Note
You may want to start with temporary markings and wait with the arrow stick-
ers until you have tested the screening station for a few days.
Optional: Backdrop.
1. Place the backdrop behind the screening position.
2. Look at the live image on the display and make sure the camera only sees the
backdrop.
Optional: Information materials.
1. Place the information roll-up
2. Place the instruction roll-up
10.3.11
Clearly mark the screening position
Note
You may want to start with a temporary marking and wait with the permanent floor
sticker until you have tested the screening station for a few days.
1. Clearly mark the screening position, e.g. by a floor sticker.
The distance from the camera lens to the screening position shall be 160 cm (5.2 ft.).
2. Remove the masking tape.
10.3.12
Mark the positions of all equipment
Mark the positions of any movable equipment (e.g. stand with camera and display, back-
drop, barrier poles) e.g. by tape on the floor. This to ensure that everything is put back in
the right place after e.g. cleaning of the floor.
Note
You may want wait with the permanent markings until you have tested the screen-
ing station for a few days.
#T810583; r. AA/75420/75423; en-US
46
