3
427-0101-01-12 Revision 100
September 2020
19
This document does not contain any export-controlled information.
Operation
This chapter includes information about
and how to operate it using the
3.1
Accessing the Elara Radar
To operate the radar, you first need to access it. Access the radar by logging in to the radar’s web
page.
To log in to the radar’s web page:
Step 1
Do one of the following:
•
In the DNA tool, double-click the radar in the Discover List. Identify the radar by model
name, R-290, and name. The default name is R-290 followed by the radar’s serial
number.
•
Type the radar’s IP address in a browser’s address bar (when the PC and the radar are
on the same network). If you do not know the radar’s IP address, you can use the DNA
tool to discover it.
The radar’s web page login screen appears.
Step 2
Type a user name and the password, and then click
Log In
.
When logging in to the radar’s web page for the first time or
for the first time after resetting the radar to its factory defaults,
type
admin
for the user name and for the password.
If you do not know the user name or password, contact the
person who configured the radar’s users and passwords.
Step 3
When logging in to the radar’s web page for the first time or
for the first time after resetting the radar to its factory defaults,
specify a new password for the admin user and then log back
in using the new password.
Use a strong password consisting of at least 12 characters and at least one uppercase letter,
one lowercase letter, and one number. Passwords can include the following special
characters: |@#~!$&<>+_-.,*?= .
The
appears.
