427-0101-01-12 Revision 100
September 2020
30
This document does not contain any export-controlled information.
Configuration
To generate and install a self-signed certificate:
Step 1
In the Certificates section, under
Certification area, select
Self-Signed
.
Step 1
Enter information such as country
code, city name, and organization
name.
Step 2
Click
Create Certificate
.
Step 3
Allow 15 seconds for the radar to
generate the certificate, at which point
a confirmation appears.
To upload a self-signed or third-party CA signed certificate:
Step 1
Select
Upload Certificates
.
Step 2
If you are uploading a self-signed certificate, under
Public Key
and then under
Private
Key
:
a Click .
b Select the appropriate key file.
c Click .
If you are uploading a third-party CA signed certificate, select and upload the
Public Key
,
Private Key
, and
CA Certificate
.
Step 3
Verify that the radar certificate files are valid. Make sure
Certificates are OK
appears
under the certificate information. Certificate information appears at the bottom of the
Certificates section, under Download certificate.
4.4.2
IEEE 802.1X-Compliant Communication
Enable or disable IEEE 802.1X-compliant TLS communication.
