20.3.7
Inspection list
In the inspection list, you can see the progress of the inspection routes and review the in-
spection point results.
To see the progress and review the results, do the following:
1. Tap the current point indicator. This displays a drop-down menu.
2. Tap
Inspection list
. This displays a list with all inspection routes and their progress.
3. Tap an item in the list to display the next level in the inspection route structure.
4. When you reach a level with inspection points, you can see their status and if they
have any images associated.
5. To make changes to an inspection point, tap the inspection point in the list. This takes
you to the live view for that inspection point.
Note
You can only make changes to inspection points in unlocked inspection
routes.
20.3.8
Adding an inspection point
If the need for another inspection point arises during the inspection, you can add the in-
spection point directly in the camera. The new inspection point will be added to the in-
spection route file and the inspection data you capture for the new inspection point will
be saved together with the results from the other inspection points in the route.
To add an inspection point, do the following:
1. Tap the current point indicator. This displays a drop-down menu.
2. Tap
Inspection list
. This displays a list with all inspection routes.
3. In the list, tap the inspection route where you want to add the inspection point. This
displays the next level in the route structure.
4. Continue to tap an item in the list until you reach the level where you want to add the
inspection point.
5. Tap
Edit
to enter edit mode.
6. Tap the
icon on an item. The new inspection point will be added below this item.
7. Enter the name of the new inspection point.
8. Select to add the new item as an inspection point.
9. Tap
Done
to exit edit mode.
20.3.9
Transferring inspection results
The inspection results are stored on the memory card:
• The inspection route file includes the data for all inspection points.
• In the DCIM folder, there is a folder for each inspection route that includes the images.
You must transfer both the inspection route file and the image folders to the computer
where the post-processing will be performed.
Note
When you have transferred the inspection route file and safely stored it on the
computer, you may want to remove or replace the file. If this is not done, the camera will
continue from the first uncompleted inspection point in the previous inspection when you
insert the memory card and start an inspection.
20.4
Configuration
The behavior of the camera during the inspection route is controlled via settings in the in-
spection route file. It is possible to override these settings in the camera.
The camera behavior settings can be configured via the
Settings
menu. Select
(
Set-
tings
) >
Save options & storage
>
Inspection route
>
Configure
.
#T810411; r. AC/70277/70566; en-US
76
Summary of Contents for GF7 Series
