10
intelliRock® III– Operating Instructions Guide
The reader connects to a PC for logger data transfer and battery recharging using the micro-
USB port on the bottom of the reader, shown in Figure 1.7.
Figure 1.7: The micro-USB port location on the bottom of the intelliRock reader.
To connect a logger to the intelliRock III reader, use the terminals located on the top of the
reader, as shown in Figure 1.8.
Figure 1.8: The terminals for connecting a logger to the intelliRock reader.
Refer to the “Starting and Using Loggers” section of this guide for instructions on connecting,
starting and using intelliRock loggers.
IntelliRock Logger Overview
The intelliRock III system uses maturity and temperature loggers as shown in Figure 1.9.
Figure 1.9: An intelliRock III logger.
Available cable lengths for both types of loggers are 4, 8, 15, 30, 50, or 100 feet.
