17
intelliRock technical support:
Visit www.flir.com/support or call (866) 276-8369, 9am - 5pm, EST
Figure 3.3: intelliRock III setup screen.
The setup screen displays the model number, firmware number and ID number of the reader.
The function keys allow setting or changing the settings shown on the bottom line of the dis-
play:
• F1: toggle between pressure unit settings, either PSI or MPa
• F2: set the time and date
• F3: toggle the clock display between 12 and 24-hour mode
• F4: toggle between temperature scales
• F5: selecting the “More” menu option will advance to a screen that displays a directory
of logger data files stored on the reader.
These intelliRock reader settings are persistent and are retained through turning the reader off
and on.
Setting the Time and Date
To set the time and date on the intelliRock III reader:
1. Power the unit on and enter the Setup menu as shown in Figure 3.3
2. Press F2 to set the time and date, as shown in Figure 3.4.
Figure 3.4: Setting time and date on the intelliRock III reader.
3. The information highlighted in red is in “edit” mode.
4. Press F3 to increase or F4 to decrease the field that is highlighted in red.
