28
intelliRock® III– Operating Instructions Guide
Figure 4.15: Entering a note about logger data.
User-entered notes are time and date-stamped. To exit without recording notation text, press
F5 to abort the process.
Viewing Graphs of Logger Data
From the logger download screen shown in Figure 4.14, press the F4 key to view a graph of
logger data. Depending on the amount of data stored on the logger, it may take a few seconds
for the reader to generate the graph. The graph will appear on the reader screen as shown in
Figure 4.16.
Figure 4.16: Graph of data stored on a logger.
All data stored on the logger is shown in the graph. Controls available when viewing the graph
are:
• Scroll left (F1)
• Zoom out (F2)
• Zoom in (F3)
• Scroll right (F4)
• Exit the graph (F5)
The informational shown in blue text just above the graph displays the scrolling increment as a
unit of time where hr stands for hours, M stands for minutes, and d stands for days. The in-
formation line also reports the range in units of time that is currently visible on the screen, as
well as the maximum and minimum temperatures for the part of the graph that is visible on the
screen.
