31
intelliRock technical support:
Visit www.flir.com/support or call (866) 276-8369, 9am - 5pm, EST
After the camera has been running for about a minute, it will display temperature readings,
using the previously selected temperature scale, in three of the corners of the screen as shown
in Figure 4.19.
Figure 4.19: Thermal image screen showing temperature data.
This temperature data is interpreted in the following way:
• The top-left reading displays the temperature of the surface directly below the cross-
hairs.
• The top-right reading displays the maximum temperature of the surface in the image.
• The bottom-right reading displays the minimum temperature of the surface in the im-
age.
After taking a thermal image, the reader screen will provide the user with the option of entering
a text description to accompany the image. Use the keyboard to enter any desired notation and
then press the F5 key to save the image and notation.
To exit the thermal camera function and return to the main reader menu, press the FLIR logo
button.
Thermal images are stored on the reader, but are viewable only from the intelliRock cloud soft-
ware. However, to confirm that thermal image files are stored on the reader, use the following
procedure:
1. From the main reader menu shown in Figure 3.2, select “Setup” by pressing the F5 key
2. Select “More” by pressing the F5 key until the “Dir.” appears as a menu option
3. Press the F1 key to access the directory of files on the reader.
