36
intelliRock® III– Operating Instructions Guide
Figure 5.4: Transferring logger data from the reader to the PC.
This process will transfer all logger data and thermal image files in the reader’s directory
(Figure 4.18) to the PC. A message will display in the information area to confirm when the data
transfer is complete.
After data is transferred from the reader to the PC software, the software will automatically
then transfer logger and thermal image data to the cloud. Users need not worry about duplicat-
ing data, as the intelliRock cloud software distinguishes between new data and duplicate data,
accepting just the data that isn’t already on the cloud.
Transferring Calibrations to the Reader
If the PC that is running the PC software is connected to the internet, and the user is logged in
to the PC software, any calibration mix curves that are stored in the intelliRock cloud software
will appear in the “Calibrations” list. To learn how to upload calibration mix curves to the intelli-
Rock cloud software, refer to the “Using the intelliRock Cloud Software” section of this guide.
To transfer any listed calibration mix curve to the reader, simply check the box by the mix you
wish to transfer, as shown in Figure 5.5.
