37
intelliRock technical support:
Visit www.flir.com/support or call (866) 276-8369, 9am - 5pm, EST
Figure 5.5: Using the PC software to transfer a calibration mix from the cloud to a reader.
After selecting calibration mix curves to transfer, click the “Download Selected Calibrations to
Reader” button found just below the list of calibrations. The status of the transfer will appear in
the information area located in the right half of the PC software window.
Configuring 900 MHz Radio Connectivity for Remote Boxes
Wireless remote boxes, whose function is described in a later section of this guide, are set up
for 900 MHz radio connectivity using the intelliRock PC software.
Wireless remote boxes are available with two options for transferring data from connected
loggers to the intelliRock cloud software:
• Cellular connectivity
• Cellular and 900 MHz radio connectivity
Wireless remote boxes come configured from the factory for one of the two options listed
above. If the use of a wireless remote box will occur in an area with poor or no cellular recep-
tion, make sure to purchase wireless remote boxes with configured for 900 MHz radio connec-
tivity.
To set up radio connectivity, first connect an intelliRock wireless remote base station, like the
one shown in Figure 5.6, to the PC that is running the intelliRock PC software.
