39
intelliRock technical support:
Visit www.flir.com/support or call (866) 276-8369, 9am - 5pm, EST
Figure 5.8: Selecting the baud rate for 900 MHz radio connectivity.
After setting the baud rate, click on the “Listen for Remote Boxes” button, which will temporari-
ly gray-out as shown in Figure 5.9 while the base station is detecting wireless remote boxes.
Figure 5.9: Listening for wireless remote boxes.
The base station should detect all wireless remote boxes that are on the same 900 MHz chan-
nel and are powered on, and within range, of the base station. A single base station can con-
nect to up to 12 wireless remote boxes simultaneously.
For more information about using intelliRock wireless remote boxes, refer to that section of
this guide.
