57
intelliRock technical support:
Visit www.flir.com/support or call (866) 276-8369, 9am - 5pm, EST
Using the intelliRock Wireless Remote
The intelliRock wireless remote box is an optional accessory that enables remote collection of
thermal or strength data from up to eight loggers. It is ideal for use in when logger placements
are distant, remote, or difficult to reach by a user with an intelliRock reader.
The wireless remote is a rugged, weatherproof box that at preset intervals will automatical-
ly transmit data from connected loggers to the intelliRock cloud software through an LTE 4G
cellular connection. For areas with poor or no cellular reception, 900 MHz radio connectivity
is also supported and requires the use of the base station accessory shown in Figure 5.6. For
European users, 3G wireless connectivity is available, with 4G planned in the future. However,
900 MHz connectivity is not offered in the European market, but 2.4 GHz is planned.
Figure 7.1: The intelliRock wireless remote box.
Remote boxes will not come from the manufacturer fully charged, so the first thing users
should do is charge the box. Use the cable and charger provided to plug the box into an electri-
cal outlet for charging. The lights on the charger will indicate the charging status as shown in
Figure 7.2.
Figure 7.2: Wireless remote charger with a green light indicating that the box is fully charged.
