432-0007-00-28-en-US v100
Integration with NMEA Devices – Application Note
Multiple NMEA Devices
In the next example, multiple NMEA talker devices are able to send NMEA sentences to the camera. In this
case, the GPS, gyrocompass, and radar are connected to an NMEA multiplexer (also known as mux), and
the output port of the NMEA multiplexer is connected to serial port of the Moxa NPort server used in the
previous example. No changes are required on the camera or the camera configuration.
As in the previous example, refer to the manufacturer’s documentation for configuration and wiring
information about the serial ports on the NMEA mux, Serial Ethenet server and other devices. Specifically,
ensure that both sides use the same signalling standard (RS422 or RS232), baud rate, and so on. Ensure
the transmitted signals from the NMEA devices go to the receive side on the NMEA mux. Similarly, ensure
the transmit signals from the NMEA mux go to the receive side of the NPort server.
Add info here about how to operate…
Track scan via jcu or FSM
Set PT device to use “exit and comeback” so that it will continue scanning if jcu moved
Need to filter certain nmea sentences?
Need to include certain “ “
