22
SiriusXM SR200 InfoLINK Receiver Installation Guide
Verify Operation
Power on the Raymarine system, and the InfoLINK
Receiver. Verify that the Power LED light is on
(blue), and that the Network LED light is randomly
flashing green, which indicates normal network
traffic.
Consult “Troubleshooting” on page 23 if the
indicator LED lights are not on, or if the Network
LED light is showing a blinking pattern.
Subscribe to SiriusXM Services
You can subscribe to the SiriusXM Marine service
and add satellite Radio at a discount by following
these steps:
1.
Make sure the Raymarine system is turned on.
Verify that you are receiving the SiriusXM signal
by entering the SiriusXM menu in your MFD.
2.
Make a note of the Radio ID. You can find it on
a label on the InfoLINK Receiver packaging and
on the label on the underside of the InfoLINK
Receiver.
NOTE!
The Radio ID does not use the letters I, O, S, or F.
3.
Activate your service:
First see our Customer Agreement for
complete terms at www.siriusxm.com/
sxmmarine and then:
•
Online: Go to
www.siriusxm.com/activate
OR
•
By phone:
1-855-SXM-WTHR
(
1-855-796-9847)
4.
Activation usually takes 10 to 15 minutes, but
may take up to an hour. We recommend that
your MFD remain on until subscribed.
5.
Activation signals can be sent again at any time
by visiting
www.siriusxm.com/refresh
.
