Solution
Possible reason
Problem
Change the function of the
trigger button.
The function of the trigger button may have
accidently been changed.
The trigger button does not
work as expected.
Enable the trigger button.
The trigger button may have accidentally
been disabled.
The trigger button does not
work at all.
Verify that the video connec-
tor is properly inserted.
The video cable connector may not be
properly inserted into the video connector
on the camera.
When connecting the in-
frared camera to an exter-
nal video monitor, no image
appears.
Verify that the video connec-
tor is properly inserted.
The video cable connector may not be
properly inserted into the video connector
on the external monitor.
Change the video format.
The camera may have accidentally been
set to PAL video format, while the external
video monitor is set to NTSC video format,
and vice versa.
Change the date & time.
The camera may have accidentally been
set to the wrong date & time.
The LCD does not display
the correct date & time.
To be able to save more
images, download the im-
ages to your computer us-
ing ThermaCAM™ Quick-
View.
The internal flash memory may be full.
It is not possible to store
any more images in the
camera.
13
82
Publ. No. 1558439 Rev. a156 – ENGLISH (EN) – February 28, 2006
13 – Troubleshooting
Summary of Contents for TermaCAM E45
