8.3
Working with measurements
8.3.1
Laying out a spot
➲
The camera requires a warm-up time of 5 minutes before accurate measurements
can be expected.
Action
Step
Press MENU/YES to display the vertical menu bar.
1
Point to
Meas. mode
on the vertical menu bar and press MENU/YES.
2
Select
Spot
in the
Meas. mode
dialog box and press MENU/YES.
3
Press SEL until small brackets appear around the spot. You can now move the
spot by pressing the navigation pad left/right or up/down.
4
The temperature will be displayed in the top right corner of the LCD.
5
8.3.2
Laying out a measurement area
➲
The camera needs a warm-up time of 5 minutes before accurate measurements
can be expected.
Action
Step
Press MENU/YES to display the vertical menu bar.
1
Point to
Meas. mode
on the vertical menu bar and press MENU/YES.
2
Select
Area max
,
Area min
or
Area avg
in the
Meas. mode
dialog box and press
MENU/YES.
3
The temperature will be displayed in the top right corner of the LCD.
4
8
58
Publ. No. 1557882 Rev. a156 – ENGLISH (EN) – February 28, 2006
8 – Tutorials
Summary of Contents for ThermaCAM B2
