16
Technical specifications &
dimensional drawings
➲
FLIR Systems reserves the right to discontinue models, parts and accessories, and
other items, or change specifications at any time without prior notice.
16.1
Imaging performance
1.3 mrad
Spatial resolution
± 2 °C/± 3.6 °F or ± 2 % of reading
Accuracy
50/60 Hz, non-interlaced
Image frequency
Automatic or manual
Focus
Adaptive digital noise reduction
Digital image enhancement
16.2
Detector
Focal Plane Array (FPA), uncooled microbolome-
ter,
320 × 240 pixels
Type
7.5–13 μm
Spectral range
16.3
Image presentation
Built-in, high resolution color LCD (TFT)
Viewfinder
16.4
Temperature ranges
Temperature range is subject to customer config-
uration, and/or three-digit camera type number.
Refer to the camera menu system to see available
temperature ranges.
Temperature range
16.5
Correction parameters
Set by number.
Emissivity correction
Automatic, based on input from distance, atmo-
spheric temperature, and relative humidity.
Atmospheric transmission correction
Automatic, based on signals from internal sensors
Optics transmission correction
16
Publ. No. 1557978 Rev. a155 – ENGLISH (EN) – February 6, 2006
97
Summary of Contents for ThermaCam P25
