8.4
Changing level & span
8.4.1
Changing the level
Action
Step
Press the joystick to display the horizontal menu bar.
1
If the camera is in continuous adjust mode, point to
Manual adjust
on the
Image
menu and press the joystick.
2
Change the level by moving the joystick up/down. An arrow pointing upwards or
downwards will be displayed.
3
Press the joystick to leave level/span mode.
4
➲
You can also change the level by pointing to
Level/Span
on the
Image
menu, and
then change the level by moving the joystick up/down.
For more information about level, see section 10.2.4.3 – Level/Span on page 75.
8.4.2
Changing the span
Action
Step
Press the joystick to display the horizontal menu bar.
1
If the camera is in continuous adjust mode, point to
Manual adjust
on the
Image
menu and press the joystick.
2
Change the span by moving the joystick left/right. Two arrows pointing away from
each other or towards each other will be displayed.
3
Press the joystick to leave level/span mode.
4
➲
You can also change the span by pointing to
Level/Span
on the
Image
menu, and
then change the span by moving the joystick left/right.
For more information about span, see section 10.2.4.3 – Level/Span on page 75.
8
Publ. No. 1557978 Rev. a155 – ENGLISH (EN) – February 6, 2006
45
8 – Tutorials
Summary of Contents for ThermaCam P25
