9.2
Keypad buttons & functions
Figure 9.5 Camera buttons – explanations
Comments
Button
■
Press briefly to switch on the camera
■
Press and hold down for a few seconds to switch off the camera
ON/OFF
■
Press briefly to autoadjust the camera
■
Press and hold down for a few seconds autofocus the camera
A
■
Press briefly to freeze an image
■
Press briefly to store an image if the image is currently frozen
■
Press and hold down for a few seconds to store without freezing
the image
■
Press to move between panes in some dialog boxes
■
Press to leave freeze mode and go to live mode
S
■
Press to leave dialog boxes without changing any settings
■
Press twice to leave edit mode
■
If the camera is in manual adjust mode, press to change the
function of the joystick to level (up/down) and span (left/right)
C
■
Press to display the menu system
■
Press to exit the menu system
■
Press to confirm selections and leave dialog boxes
■
Press to select measurement markers
■
Move up/down or left/right to navigate in menus, dialog boxes,
and on the screen
■
Move up/down to change focus and left/right to zoom
■
If the camera is in manual adjust mode, press C to change the
function of the joystick to level (up/down) and span (left/right)
Joystick
Press + or – to focus
+/–
Press to autoadjust
F1
Change palette
F2
Press to switch on Laser LocatIR
Button for Laser LocatIR
9
60
Publ. No. 1557978 Rev. a155 – ENGLISH (EN) – February 6, 2006
9 – Camera overview
Summary of Contents for ThermaCam P25
