SYS11000OM Rev G
[UF 350-HD, Generic Template]
FLIR Systems Polytech AB
Page
29
of
70
Antennvägen 6
SE-187 66 Täby
Sweden
1.4.13
Elevation Drift Dial
Legend
FUNCTION
Description
Screen Symbology
Reference/Notes
Lev/Iris
Drift El
Control type
:
Continuously rotating encoder with
momentary push button.
Function
: Multiple functions
dependent on selected sensor as
follows;
-
SET
ELEVATION
DRIFT
Elevation Drift Adjustment;
Holding
FUNC
button and adjusting
Drift El
Dial adjusts the gimbals drift.
(induced by servo loop offsets)
To facilitate this action it’s
recommended to select the TV
sensor and zoom in to NFOV.
Adjustments are updated and saved
in the systems non-volatile memory
every 10 seconds.
No symbology for this
action
NOTE:
Before this
function/adjustment is
performed, a Joystick
Calibration should be performed.
(See § 1.4.7)
TV
MANUAL
IRIS
1)
TV sensor selected;
Manual adjustment of TV Iris
If TV is in auto adj. mode the initial
rotation of the control causes it to
revert to manual mode, the TV will
then remain in manual mode until
the
Auto
button is pressed.
Text field 2:
TV/M
Text field 6:
IRIS:F##
## =
Actual Iris value
(F1.6 to F14)
[Sony 6300]
(F1.4 to F4.6)
[Hitachi SC-120R]
TI
MANUAL
LEVEL
2)
TI sensor selected;
Manual adjustment of TI Level
If TI is in auto adj. mode the initial
rotation of the control causes it to
revert to manual mode, the TI will
then remain in manual mode until
the
Auto
button is pressed.
Text field 2:
TI/M
Text field 6:
LEVEL:± ###
### =
Actual Level value
(-256 to 255)
