SYS11000OM Rev G
[UF 350-HD, Generic Template]
FLIR Systems Polytech AB
Page
43
of
70
Antennvägen 6
SE-187 66 Täby
Sweden
DDE OFF:
Indicate that DDE (IR camera Digital Detail Enhancement) is not active.
25%:
Indicates that the DDE is activated on a 25% level
40%:
Indicates that the DDE is activated on a 40% level
55%:
Indicate that the DDE is fully activated.
1.5.7
Symbol area 7
Indicates the aircraft position Latitude as supplied by an external GPS system.
Displayed format is Deg: Min: Two decimal places of minutes:
Sign (N or S)
1.5.8
Symbol area 8
Indicates the aircraft position Longitude as supplied by an external GPS system.
Displayed format is Deg, Min: Two decimal places of minutes:
Sign (E or W)
1.5.9
Symbol area 9
Indicates the date supplied from the GPS system (if included in system).
Displayed format is: Year (four digits) / Month / Day
1.5.10
Symbol area 10
Indicates the time supplied from the GPS system (if included in the system).
Displayed format is to 24hr standard, Hours / Minutes / Seconds
1.5.11
Symbol area 11
This area is used to display autotracker status. It presents the same messages in both
thermal and TV modes of operation.
STBY
: Indicates auto tracker is in Standby mode.
CORR
: Indicates auto tracker is in Correlation mode.
CENTR
: Indicates auto tracker is in Centroid mode.
SCENE
: Indicates auto tracker is in Scene lock mode.
GEO
: Indicates INS is used for Geo-Target mode.
