4.5
VSC-IR32 Thermal MSX Camera Probe
The VSC-IR32 is a thermal MSX, rectangular, side-looking probe. It is suitable
for use in CAT IV 600 V environments.
Always update the VS290–00 Videoscope Display’s firmware, as explained in
Section 14, before connecting a new probe, to ensure optimum performance.
CAUTION
Ensure that the VS290–00 is powered off before removing or attaching probes. Do not at-
tempt to remove or attach a probe with the VS290–00 powered up.
Note that the release tab (item no. 10 in Figure 4.1) must be pushed to release
a probe from the Videoscope display when removing it.
Figure 4.5
VSC-IR32 camera probe.
1. Thermal camera lens
2. Digital camera lens
3. LED worklight
4. Probe
4.6
VSC-IR33 Thermal MSX Camera Probe
The VSC-IR33 is a thermal MSX, side-looking, round probe. It is suitable for
use in CAT IV 600 V environments.
Always update the VS290–00 Videoscope Display’s firmware, as explained in
Section 14, before connecting a new probe, to ensure optimum performance.
CAUTION
Ensure that the VS290–00 is powered off before removing or attaching probes. Do not at-
tempt to remove or attach a probe with the VS290–00 powered up.
Note that the release tab (item no. 10 in Figure 4.1) must be pushed to release
a probe from the Videoscope display when removing it.
#NAS100060; r. AB/80750/80750; en-US
9
Summary of Contents for VS290-00
