SAFETY INFORMATION
Safety Notes
• Before operating the device, you must read, understand, and fol-
low all instructions, dangers, warnings, cautions, and notes.
• FLIR Systems reserves the right to discontinue models, parts or
accessories, and other items, or to change specifications at any
time without prior notice.
WARNING
VS290–32 and VS290–33 are suitable for use in CAT IV 600 V environments.
VS290–21 is not intended for use in high voltage (> 600 V AC) environments.
WARNING
•
Do not operate the device if you do not have the correct knowledge. Incor-
rect operation of the device can cause damage and injury to persons.
•
Do not replace the batteries with the device powered up. This can cause
damage to the instrument and can cause injury to persons.
•
Do not use the device if it show signs of damage. Injury to persons can
occur.
•
Be careful working near voltages > 25 VAC or 35 VDC. There is a risk of
shock from these voltages. Injury to persons can occur.
•
Do not touch expired/damaged batteries without gloves. Injury to persons
can occur.
•
Do not cause a short circuit of the battery. This can cause damage to the
instrument and can cause injury to persons.
•
Do not put batteries into a fire. Injury to persons can occur.
CHARGING THE BATTERY
This kit is supplied with two high capacity batteries and a stand-
alone two-bay charger. To charge batteries, place them in the
charger and plug it into an AC receptacle.
#NAS100055; r. AE/79702/79705; en-US
2
