WORKING WITH IMAGES AND VIDEO
Capturing Images and Video
To select video or single-shot mode see the Recording Mode sub-
menu section.
Pull and hold the trigger to capture an image or to start recording
video. For images, release the trigger when the filename appears.
For video, release the trigger when the video timer starts. Pull and
hold trigger to stop the video recording.
Images and videos are stored on the memory card (supplied) in-
serted in the VS290–00 top compartment. Do not insert or remove
the memory card while the VS290–00 is powered.
Viewing Images and Video
Press the Gallery button to open the image/video gallery. Scroll to
an image/video and press Menu to open it. Press Menu again at an
opened image/video to access these options: Play (video only), full
screen mode, image/video information, and image/video delete.
Transferring Images and Video
Transfer to a PC by first connecting the VS290–00 to a PC using the
supplied USB cable (the USB jack is located in the VS290–00 top
compartment), and then use the VS290–00 as you would a typical
external storage drive.
#NAS100055; r. AE/79702/79705; en-US
8
