3. Place the centering ring into the holder.
4. Clean the visible filter surface.
5. Place the filter spacer on top of the first filter.
6. Place the second filter into the holder. Make sure it seats correctly on top of the filter
spacer and is centered with the centering ring.
7. Gently insert the threaded filter ring and tighten it using the filter tool. Take great care
not to damage the filter with the tool.
7.1.6
Adding a custom filter parameter into the camera
7.1.6.1
General
Up to two filters can be mounted in a slot. A slot is defined in the camera’s slot.ini file,
and a filter’s definition is stored in a text file in the camera.
Slot.ini file is a text file containing the holder identification and the corresponding filter
numbers.
[Holder XXX]
F1 = FYYYY
F2 = FZZZZ
Where XXX is the unique identifier of the slot, and YYYY and ZZZZ are filter numbers re-
ferring to the existing FYYYY.txt and FZZZZ.txt files, respectively.
For instance, for a holder defined by ID 42 in which the filter F3221 is mounted, the fol-
lowing should be added to the slot.ini file:
[Holder 42]
F1 = F3221
F2 = F9999
For a holder defined by ID 45 in which the filters F3221 and F1518 are mounted, the fol-
lowing should be added to the slot.ini file:
[Holder 45]
#T810206; r. AA/43064/43088; en-US
32
Summary of Contents for X6530sc Series
