User Manual X8400 sc
13
The temperature range of the camera can be automatically adjusted using the autoexposure
button on the touchscreen. Please refer to §6.2.2 for more information on autoexposure.
If the thermal scene does not match the configuration measurement (spectral filter on filter
wheel), it is required to select the correct configuration measurement in ResearchIR Max.
Please refer to §4.4.4)
Figure 3 : LCD Touchscreen Description
1
Image Statistics
4
Start Acquisition in
ResearchIR Max
2
Camera configuration
information
5
Auto-exposure
3
Synchronisation
information
6
Change Color palette
Detaching the touchscreen LCD
4.3.1.1
The LCD screen can be detached from the camera and used remotely when the camera is
mounted on hard to reach position.
Note
•
The camera can still be operated without any LCD screen connected.
•
The screen can be detached and attached while the camera is in operation
Procedure
Follow the procedure to install and detach the LCD screen from the camera
1
Unscrew the LCD screw using a flat screwdriver or a simple coin
2
Gently lift up the screen to disconnect it from the camera
3
Set in place the protective cap provided with the camera to avoid dust or water to
enter in the camera
4
5
2
3
6
1