User Manual X8400 sc
17
General
The X8400sc camera is interfaced with FLIR ResearchIR Max software. FLIR ResearchIR
Max is a powerful image acquisition and analysis tool. Please refer to ResearchIR Max user
manual for operating instructions. X8400sc specific camera control is described in this
document.
Procedure
Follow the procedure to select and connect the camera
1
Click the select camera button
2
Select the X8400sc camera.
The camera’s IP address is displayed when connected with GigE connection.
The CameraLink® port is displayed when connected with CameraLink®.
3
Click Connect button to activate the camera connection.
Once connected, the camera control interface is populated with camera parameters and the
live image is displayed on the current tab.
4.4.3 Image size adjustment
General
The X8400sc camera can be set up to use a subpart of the detector. As a consequence, the
camera can be operated at higher frame rates. The selection is done through the upper part
of the camera control panel.
