650-72000-00 All material copyright ©2017 FLOE International, Inc. Unauthorized reproduction is strictly Prohibited. Specifications subject to change without notice. 8/7/17
6
Cargo Max Assembly
– Step 4
TAILGATE RAMP INSTALLATION
Insert the Tailgate Ramp into the Hinge Clamps on the bed at an approximately 30-degree angle. See figures
4A & 4B.
NOTE:
There are
four
hinge clamps on the bed. The Tailgate Ramp needs to be aligned to fit within each hinge.
IF the ramp does not align, loosen hinge bolts install ramp and re-tighten hinge bolts.
