9
Loading your FLOE trailer
Securing The Load
Do not ever strap the load to or over the side of the trailer
bed. Doing so may lead to a dangerously unsecured load
and may cause damage not covered under your warranty.
WARNING
TIE DOWN INSTRUCTIONS
• The Versa-Max
TM
Utility Trailer is provided with four tie
down plates. Use any of these tie down plates as needed to
safely secure the load. The maximum capacity of each tie
down plate is 1200 pounds.
• To use the tie down plates, simply place a hook through
the center metal strip in the center of the tie down plate as
shown.
• These plates can be moved into any of the Versa-Tracks
TM
in the bed or edges of the trailer. Ensure that the tie down
plates are positioned to adequately tie down the load. To
move a tie down plate, perform the following:
To remove the plate: Use a 9/16” wrench to loosen and
remove the two bolts which attach the plate, and then
remove the tie down plate and the two tie down cams.
To attach the plate: Place the two tie down cams into the
desired location. Place the tie down base plate directly over
the cams, and attach with the bolts. Tighten the bolts using
a 9/16” wrench.
Ensure that the load is adequately secured. Load may
become loose during travel. Check your load while traveling.
Unsecured loads can cause product damage, road hazards
and/or cause severe injuries and death.
WARNING
When securing cargo, consider how it will behave if
extreme acceleration, deceleration (fast braking),
swerving, or poor road conditions occur. A load that
shifts forward or backward may cause an unsafe
situation which could result in product damage, severe
injuries or even death.
WARNING
