3.25
(82)
3.5
(90)
3.44
(87)
FEATURES
• Self-Priming
• Dry Running
• Soft, Noise Absorbing Mounts
• Corrosion Resistant Materials
• D.C. Models Meet U.S.C.G. Electric Standards
• A.C. Models Have 6’ Power Cord
SPECIFICATIONS
Motor:
Permanent Magnet, Ball Bearing. CE Models
are fully suppressed.
Pump:
Four chamber diaphragm design; Self-priming
up to 10 ft. suction lift; Pump able to run dry
without damage; Removable port to hose
connectors.
Note:
4300 Series pumps are not bypass type
pumps and can be used in systems with an
accumulator tank.
(Available on 12 & 24V d.c. Models and 230V a.c. Model)
With pump switch off, and battery fully charged, fill water
tank, open all faucets then turn pump switch on. Water
will begin to flow. When water is free of air, turn faucets
off, remember you are filling the water heater and the
toilet and shower lines. When all valves are shut off
pump will stop. Should pump fail to stop, turn switch off
and see the trouble shooting guide..
OPERATION
Pump Series
Dimensions - Inches (mm)
Weight
Height
Width
Length
lb. (kg)
4305-xxx
3.75 (95)
6.3 (160)
8.2 (208)
3.9(1.8)
4305-144
3.75 (95)
6.3 (160)
8.6 (218)
4.5(2.1)
4325-XXX
3.75 (95)
6.3 (160)
9.9 (252)
6.0(2.8)
AMP DRAW
FLOW
PRESSURE SWITCH
MODEL*
VOLTS
@ 10 psi (0.7 bar)
GPM (V.in)
MAX psi (bar)
4305-144
12V dc
5.0
3.5 (13.5)
40 (2.8)
4305-500
12V dc
4.0
3.3 (12.5)
35 (2.5)
4305-501
24V dc
1.8
3.3 (12.5)
35 (2.5)
4305-502**
24V dc
2.0
2.3 (8.7)
20 (1.3)
4305-503**
12V dc
2.4
2.3 (8.7)
20 (1.3)
4325-143
12V dc
6.0
4.5 (17)
40 (2.8)
4325-343
24V dc
2.5
4.5 (17)
40 (2.8)
4325-443
32V dc
2.0
4.5 (17)
40 (2.8)
4325-043
115V ac
0.5
4.5 (17)
40 (2.8)
4325-243
230V ac
0.3
4.5 (17)
40 (2.8)
**Low Flow/Low Pressure Models
* CE fully suppressed models are identified by a prefix “R” and a CE mark on the label. (i.e. R4305-500)
Self Declaration Of Conformance (SDOC) is available upon request.
Model 4300 Series
“Quad II Diaphragm”
Models
4305 & 4325
Automatic Water System Pump
