12
SPECIFICATIONS – STAINLESS STEEL
All data on Models 1/2 inch, 3/4 inch, and 1 inch determined with 1 centipoise solvent test fluid
at 70° F (21° C). Data on Models 1-1/2 inch and 2 inch is determined with water at 70° F (21° C).
Model-Size
S05
1/2 in.
S07
3/4 in.
S10
1 in.
S15
1
‑‑‑‑
1/2 in.
S20
2 in.
Linear Flow Range
Gallons/minute (GPM)
1-10
2-20
5-50
10-100
20-200
Litres/minute (LPM)
3.8-37.9
7.6-75.7
18.9-190
38-380
76-760
Maximum Flow
1
Gallons/minute (GPM)
15
30
75
150
300
Litres/minute (LPM)
56.8
113.6
284
568
1,136
Maximum Pressure Drop
in 10:1 Range
PSIG
8
6
10
4
7
bar
0.55
0.41
0.69
0.28
0.48
Frequency Range in Lin-
ear Flow Range
42-420 Hz 37-370 Hz 47-470 Hz
36-360 Hz
33-330 Hz
Connections
NPT or ISO Threads
Yes
Yes
Yes
Yes
Yes
Female
Yes
Yes
Yes
Yes
Yes
Inlet/Outlet Size
1/2 in.
3/4 in.
1 in.
1-1/2 in.
2 in.
Wrench Size:
Inch
1-1/16 in.
1-5/16 in.
1-5/8 in.
2-3/8 in.
3 in.
Millimeter
27 mm
33 mm
41 mm
60 mm
75 mm
Weight*
Pounds
1.0 lbs.
1.2 lbs.
1.7 lbs.
3.3 lbs.
6.1 lbs.
Kilograms
0.5 kg
0.5 kg
0.8 kg
1.5 kg
2.8 kg
* Computer electronics add 0.2 lbs. (0.1kg) to total weight.
1
The meter can operate up to this flowrate without damage. Continuous operation will se-
verely degrade meter life and performance.
Performance
Linear Range for 1/2 in.:
10:1 @ ±2.0% of reading
Linear Range for 3/4 in. and 1 in.:
10:1 @ ±1.5% of reading
Linear Range for 1-1/2 in. and 2 in.: 10:1 @ ±1.0% of reading
Repeatability:
±0.1%
Pressure Rating
Standard Stainless Steel Meter
1,500 PSIG (103 bar)
Wetted Components
Housing:
316 Stainless Steel
Journal Bearings:
Ceramic (96% Alumina)
Shaft:
Tungsten Carbide
Rotor and Supports:
PVDF
Retaining Rings:
316 Stainless Steel
Temperature Range
-40° F to +250° F (-40° C to +121° C)
These temperatures apply to operations and storage. They are only for the turbine with-
out computer electronics. Final operational temperature range is determined by com-
puter electronics or accessory modules.
Summary of Contents for G2
Page 23: ...23 NOTES ...
