FEATURES
•
1500 psi rating
•
NPT Threads
•
Large 6-digit LCD display with two decimal-point
precision
•
Dispense total display in pints, quarts, US gallons or
liters
•
Unit of measure selectable from the front of register
•
Totalization in US gallons and liters
•
Resettable and non-resettable totalizer
•
Display operation temperature range –4…140° F
(–20…60° C)
•
Low battery indicator
•
Long life field replaceable top load battery
•
Accuracy of ± 0.5%
•
Calibration factor programmable from front of register
•
Calibration factor saved in non-volatile memory
NOTE
: The use of meters in applications other than those
described in this material may result in inaccuracy and
possible meter failure. Each meter is designed for use
with a specific type of fluid. Do not use petroleum-based
products in a meter designed for water-based fluids, or
water-based fluids in a meter designed for petroleum-
based products. It is also important that fluids be properly
filtered before entering the meter. Foreign particles will
cause inaccuracy or malfunction of the meter. Warranties
are void in the circumstances described above.
Limited Warranty Policy
Great Plains Industries, Inc. 5252 E. 36
th
Street North, Wichita, KS USA 67220-
3205, hereby provides a limited warranty against defects in material and workman-
ship on all products manufactured by Great Plains Industries, Inc. This product
includes a 1 year warranty. Manufacturer’s sole obligation under the foregoing
warranties will be limited to either, at Manufacturer’s option, replacing or repairing
defective Goods (subject to limitations hereinafter provided) or refunding the pur-
chase price for such Goods theretofore paid by the Buyer, and Buyer’s exclusive
remedy for breach of any such warranties will be enforcement of such obligations
of Manufacturer. The warranty shall extend to the purchaser of this product and
to any person to whom such product is transferred during the warranty period.
The warranty period shall begin on the date of manufacture or on the date of
purchase with an original sales receipt. This warranty shall not apply if:
A.
the product has been altered or modified outside the warrantor’s duly
appointed representative;
B. the product has been subjected to neglect, misuse, abuse or damage
or has been installed or operated other than in accordance with the
manufacturer’s operating instructions.
To make a claim against this warranty, contact the GPI Customer Service Depart-
ment at 316-686-7361 or 888-996-3837. Or by mail at:
Great Plains Industries, Inc.
5252 E. 36
th
St. North,
Wichita, KS, USA 67220-3205
If you are outside North or South America contact:
Great Plains Industries – Australia
1/16 Atkinson Road,
Taren Point NSW 2229, Sydney, Australia
The company shall, notify the customer to either send the product, transportation
prepaid, to the company at its office in Wichita, Kansas, or to a duly authorized
service center. The company shall perform all obligations imposed on it by the
terms of this warranty within 60 days of receipt of the defective product.
GREAT PLAINS INDUSTRIES, INC., EXCLUDES LIABILITY UNDER THIS WAR-
RANTY FOR DIRECT, INDIRECT, INCIDENTAL AND CONSEQUENTIAL DAMAGES
INCURRED IN THE USE OR LOSS OF USE OF THE PRODUCT WARRANTED
HEREUNDER.
The company herewith expressly disclaims any warranty of merchantability or
fitness for any particular purpose other than for which it was designed.
This warranty gives you specific rights and you may also have other rights which
vary from U.S. state to U.S. state.
Note: In compliance with MAGNUSON MOSS CONSUMER WARRANTY ACT –
Part 702 (governs the resale availability of the warranty terms).
920841-02
10/14
©2014, Great Plains Industries, Inc. All rights reserved.
and FLOMEC
TM
are trademarks of Great Plains Industries, Inc.
SPECIFICATIONS
Meter Model:
LM51DN
Maximum Flow:
8 GPM (30 LPM)
Minimum Flow:
0.25 GPM (1 LPM)
Operating Pressure (Max.):
1500 psi (103 bar)
Operating Pressure (Min.):
5 psi (0.35 bar)
Operating Temperature (Max.):
140
°
F (60
°
C)
Operating Temperature (Min.):
-4
°
F (-20
°
C)
Accuracy:
±
0.5%
Weight:
2.0 lb. (0.9kg)
Inlet & Outlet Connections:
1/2" NPTF
DIMENSIONS
Dimension
Size
A
4.04 in. (102.6 mm)
B
3.27 in. (83 mm)
C
2.99 in. (75.8 mm)
